What it approves
Installation and maintenance of new roller-bearing lifters and camshaft.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to Air P Techno Inc.
2520, Chemin de l’Aeroport St-Mathieu-de-Beloeil, Quebec Canada J3G 4S5
Part 33 of the Code of Federal Regulations.
Original Product -- Type Certificate Number : E-274
Make : Textron Lycoming
Model : O-320-H2AD
The installation and maintenance of new roller-bearing lifters and camshaft to be done in accordance with Master Document List, Document No. MDL2003-001, Project No. 307-2003-001, Rev. (E), dated December 19, 2003 or later Transport Canada approved revision.
1. This STC is to be used in conjunction with Alternate Means of Compliance (AMOC) Alleviation No. AARDG 2003 / A145 dated December 17, 2003.
2. Compatibility of this design change with previously approved modifications must be determined by the installer.
3. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : June 15, 2004
Date of issuance : September 20, 2005 Date reissued :
( Signature) Michele J. Maurer Acting Manager New York Aircraft Certification Office
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Textron Lycoming AVCO Corporation | O-320-H2AD | E-274 |