What it approves
Remove existing rocker arm assemblies and install modify rocker arm assemblies.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate FAA Form 8110-2 (5/14) Page 1 of 2 This certificate issued to:
Number: SE09637SC General Aviation Modifications, Inc.
2800 Airport Road, Hangar A Ada, OK 74820 Part * of the *Federal Aviation Regulations Original Product – Type Certificate Number: Make: FAA Approved Model List (AML) for Model:
approved models and applicable airworthiness regulations See attached Description of Type Design Change:
Remove existing rocker arm assemblies and install modified rocker arm assemblies in accordance with Murray Hammond installation instructions “Introduction to Needle Bearing Rocker Arm Conversions” Number NR99-P dated December 10, 199 9, or later FAA approved revisions or install modified rocker arm assemblies per General Aviation Modifications, I nc. installation instructions Number NR99-I, Revision A dated March 16, 2018 or later FAA approved revisions.
General Aviation Modifications, Inc. Instructions for Continued Airworthiness, Report 26-7560001, Rev. IR, dated November 5, 2018 or later revision is required.
1. Approval of this change in type design applies to engines listed in the AML only. This approval should not be ext ended to engines of these models on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that engine.
2. A copy of this certificate must be maintained as a part of the permanent records of this modified engine.
Date of Application: 11/22/1999 Date of Issuance : 02/15/2000 Date Reissued: 04/28/08; 08/26/08; 12/31/15 Date Amended: 03/06/19 By Direction of the Administrator Signature Jim Grigg Title: Manager, Fort Worth ACO Branch Compliance & Airworthiness Division Aircraft Certification Service
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate FAA Form 8110-2 (5/14) Page 2 of 2
Transfer Endorsement Transfer the ownership of Supplemental Type Certificate Number: SE09637SC To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 91
| Make | Model | Data sheet |
|---|---|---|
| Continental Motors | IO-470-A | E-273 |
| Continental Motors | IO-470-C | E-273 |
| Continental Motors | IO-470-D | 3E1 |
Every issue · 4
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| March 6, 2019 | Amended, current | CertificateApproved model list |
| December 31, 2015 | Reissued, earlier issue | CertificateApproved model list |
| August 26, 2008 | Reissued, earlier issue | Certificate |
| April 28, 2008 | Reissued, earlier issue | Certificate |