What it approves
Installation of piston rings for chrome plated cylinders and cast iron valve guides
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of 2
Number: SE1429SW
Part 13 of the Civil Air Regulations.
Original Product – Type Certificate Number: E1CE Make: Continental Motors Inc.
Model: IO-360-A, -C, -D Description of Type Design Change:
Installation of piston rings for chrome plated cylinders and cast iron valve guides according to Drawings 1705, Rev. A;
1711 Rev. A1; 1723, 1723A, Rev. A; 1723E, 1724, Rev. A1; 1724A, Rev. A1; 1724E, Rev. A1; 1729, Rev. A1; 1740, or later FAA approved revision.
Pistons reworked with wider grooves per drawing 11021 dated 1/21/72 are eligible with this STC. This rework is to allow use of overwidth piston rings specified on the drawings noted above.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission.
Date of Application: October 14, 1971 Date Reissued: 8/27/07; 7/20/15; 1/25/16; 10/31/16 Date of Issuance: February 8, 1972 Date Amended: 2/22/72; 11/22/76; 1/11/83 Revision 3
Signature
Title James A. Grigg Acting Manager, Fort Worth Aircraft Certification Office, Southwest Region Continental Motors Inc.
2039 S. Broad St.
Mobile, AL 36615
FAA Form 8110-2 (5/14) Page 2 of 2
Transfer the ownership of Supplemental Type Certificate Number: SE1429SW
To (Name and address of transferee)
From (Name and address of grantor)
FAA Form 8110-2 (5/14) Page 3 of 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.