STC SE1760NM

United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate (This STC is a duplicate original to replace the original which was lost. Issued 3/14/06) Number SE1760NM

This certificate, issued to: Sky Services, Inc.

1725 E Street N.E.

Auburn, WA 98002

Part 33 of the Federal Aviation Regulations.

Original Product⎯Type Certificate Number: E9CE-13 Make: Continental Model: TSI0-360-A, -AB, -B, -C, -CB, -D, -DB, -E, -F, -G, -GB, -H, -HB, - EB, -FB, -JB; LTSI0-360-E, -EB;

TSI0-360-KB and LTSI0-360-KB.

Description of the Type Design Change: Installation of a pressurized magneto system for Bendix Models S6RN-25 and S6LN-25 in accordance with S.G.H., Inc. Drawing and Installation Instruction No. SGH- 3000-A.

Limitations and Conditions: Approval of this change in type design applies basically to the above model engine only. This approval should not be extended to other engines of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that engine. A copy of this Certificate shall be maintained as part of the permanent records for the modified engine.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: October 21, 1982 Date reissued: December 7, 1987, March 14, 2006 Date of issuance: November 12, 1982 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title) Any alteration of this certificat e is punishable by a fine of not exceeding $1,000, or imprisonment not exceeding 3 years, or both.