What it approves
Installation of an oil tank safety cap adapter which prevents loss of oil in the event of loss or damage to the oil filler cap.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA FORM 8110-2(10-68) PAGE 1 of 2 PAGES Number SE2117SO This certificate issued to Jet Avion Corporation 3000 Taft Street Hollywood, FL 33021
Part 13 of the Civil Air Regulations.
Original Product--Type Certificate Number : E2EA Make : Pratt and Whitney Model : JT8D-1,-1A,-1B,-7,-7B,-9,-9A,-11,-15,-15A,-17,-17A, -17R,-17AR,-209,-217,-217A,-217C,-219
Description of Type Design Change: Installation of an oil tank safety adapter which prevents loss of oil in the event of loss or damage to the oil filler cap, per Propulsion Technology Corp. (PTC) Drawing PT8611A01, Revision B, dated 5/22/87, or later FAA approved revision.
Limitations and Conditions: This approval should not be extended to other engines of this model on which other previously approved modifications are incorporated, unless it is determine by the installer that the interrelationship between this change and any other previously approved modifications will produce no adverse effect upon the airworthiness of that engine. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : February 13, 1987
Date of issuance : May 29, 1987 Date reissued : November 16, 1998; September 08, 2006
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 20
| Make | Model | Data sheet |
|---|---|---|
| Pratt & Whitney Division | JT8D-209 | E9NE |
| Pratt & Whitney Division | JT8D-217 | E9NE |
| Pratt & Whitney Division | JT8D-217A | E9NE |