STC SE3632SW-D

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SE3632SW-D This certificate issued to: RAM Aircraft, Limited Partnership 7505 Karl May Drive Waco, TX 76708 Certifies that the change in the type design for the following product with the limitations and conditions therofor as specified hereon meets the airworthiness requirement's of Part 13 of the Civil Air Regulations.

Original Product Typo Certificato Number : ESCE Make: Teledyne Continental Model: TSIO-520-B, D, E, J, K, L, N, BB, EB, JB, KB, NB, VB, and WB Description of Type Design Change: Installation of induction hose clamps in accordance with RAM Aircraft, Limited Partnership Drawing No. 1170, Revision A, dated October 7, 1985, and Drawing No. 1171, dated May 23, 1985, or later FAA approved revisions.

Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of Application: July 12, 1985 Date Reissued: October 08, 2001, February 28, 2008, September 4, 2008 Date of Issuance: July 10, 1986 Date Amended:

FEDERAL AVIATION By Direction of the Administrator

ORIGINAL SIGNED BY TERRY BOWDEN (Signature) TOMINISTRATO Terry L. Bowden DAS administrator DAS-700100-SW RAM Aircraft LP Waco, Texas (Title) 47