What it approves
Modification of AVCO Lycoming O-320-E2A engine by replacing four pistons with four O-320-D2A pistons
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part 13 of the Civil Air R egulations .
(See Type Certificate Data Sheet Number E-274 for the complete certification basis).
Original Product --Type Certificate N umber :
Modification of AVCO Lycoming O-320-E2A engine by replacing four pistons with four O-320-D2A pistons (P/N 75089) in accordance with Arthur Mattson Installation Instructions, dated June 15, 1995, or later FAA Approved revision.
1) The installer must determine whether this design change is compatible with previously approved modifications.
2) If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission.
3) Engine rating identification plate to be installed immediately adjacent to the original identification plate.
This certificate an d the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.
Plane Dynamix, LLC 3650 Rogers Road, Suite 231 Wake Forest, NC 27587
E-274 M ake : AVCO Corporation, Lycoming Div.
M odel : O-320-E2A
Date of application : February 9, 1995
Date of issuance : June 23, 1995 Date reissued : August 26, 2015
B y direction of the A dministrator Original Signed By:
Karol Mordasiewicz
(Signature) Karol Mordasiewicz Manager, Airframe and Administrative Branch Chicago Aircraft Certification Office
(Title)
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
N umber SE367CH
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.