What it approves
Installation of any of all parts identified by Drawing/Parts Application List AEC9109-2.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of 3
Number: SE8110SW
Part 13 of the Civil Air Regulations
Original Product – Type Certificate Number: E-298 Make: Continental Motors Inc.
Model: GO-300A, B, C, D, E, F
Installation of any or all parts identified by Airmotive Engineering Drawing/Parts Application List AEC9109-2, dated September 12, 1991, and identified again on page 3 of this STC.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of Application: February 27, 1990 Date Reissued: 08/27/07; 07/20/15; 01/25/16; 10/31/16 Date of Issuance: September 24, 1991 Date Amended:
Signature
Title James A. Grigg Acting Manager, Fort Worth Aircraft Certification Office, Southwest Region Continental Motors Inc.
2039 S. Broad St.
Mobile, AL 36615
FAA Form 8110-2 (5/14) Page 2 of 3
Transfer the ownership of Supplemental Type Certificate Number: SE8110SW
To (Name and address of transferee)
From (Name and address of grantor)
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SE8110SW
FAA Form 8110-2 (5/14) Page 3 of 3
Date of Issuance: September 24, 1991 Date of Reissuance: October 31, 2016
Description of Type Design Change (continued):
Drawing Number & Revision Level Part Name Date
AEC641917 C Cylinder Assembly 06/13/91 AEC65080 E Cylinder Assembly 06/14/91 AEC65315 C Cylinder Head 05/06/91 AEC65316 C New Cylinder Assembly 06/13/91 AEC65314 C New Cylinder Assembly 06/13/91 AEC6477 D Cylinder Head 04/23/91 AEC65317 C Thread & Pilot Dimensions 04/01/91 Cylinder Head AEC65300 C Thread & Pilot Dimensions 04/02/91 Cylinder Head
NOTE: See Application List AEC9109-2, dated September 12, 1991.
-END-
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SE8110SW
FAA Form 8110-2 (5/14) Page 4 of 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.