STC SE910SW

Supplemental type certificate · Continental Motors, Inc.

Holder
Continental Motors, Inc. · United States
Status
Current · Reissued
Status date
October 31, 2016
Applied
September 6, 1967
Product
Engine
Certification basis
Part 13, Part 21
Data sheets
TCDS3E1TCDS3E3

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

The manufacturer of pistons, valve guides, and parts

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of 3

Number: SE910SW

Part 13 of the Civil Air Regulations

Original Product – Type Certificate Number: (See attached Make: FAA Approved Model List (AML) for list of Model: Approved models and applicable airworthiness Regulations

The manufacturer of pistons, valve guides, and parts according to Airmotive Engineering Corporation FAA approved Drawing List dated May 19, 1978, or later FAA approved revision.

Date of Application: September 06, 1967 Date Reissued: 07/20/15; 01/25/16; 10/31/16 Date of Issuance: May 13, 1968 Date Amended: 12/04/72; 04/05/78; 05/31/78; 02/28/82;

07/08/82; 12/09/82 Revision 6

Signature

Title James A. Grigg Acting Manager, Fort Worth Aircraft Certification Office, Southwest Region Continental Motors Inc.

2039 S. Broad St.

Mobile, AL 36615

FAA Form 8110-2 (5/14) Page 2 of 3

Transfer the ownership of Supplemental Type Certificate Number: SE910SW

To (Name and address of transferee)

From (Name and address of grantor)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SE910SW

FAA Form 8110-2 (5/14) Page 3 of 3

Date of Issuance: May 13, 1968 Date Amended: April 02, 2008 Date of Reissuance: October 31, 2016

The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Airmotive Engineering Corporation parts are interchangeable with Continental engine parts as follows:

Airmotive Part No. Continental Part No. Name of Part

AE-C-35967 TT 35967 Exhaust Valve Seat Insert AE-C-35971 TT 35971 Valve Spring Retainer AE-C-65032 TT 631375 Cylinder Barrel AE-C-520105 TT 520105 Valve Spring (Outer) AE-C-520106 TT 520106 Valve Spring (Inner) AE-C-530844 TT 530844 Piston Pin AE-C-534609 TT 534609 Push Rod Housing Washer AE-C-527296 TT 537296 Push Rod Housing AE-C-539467 TT 539467 Piston Pin and Plug Assembly AE-C-539473 TT 539473 Piston Pin Plug AE-C-539740 TT 539740 Valve Rocker Shaft AE-C-625065-1 TT 625065-1 Rocker Shaft Bushing AE-C-625065-2 TT 625065-2 Rocker Shaft Bushing AE-C-625393 TT 625393 Valve Spring Retainer (Inner) AE-C-625858 TT 625858 Intake Valve Seat Insert AE-C-626147 TT 626147 Push Rod Housing Spring AE-C-626820 TT 626820 Cylinder Assembly (Rebarrel) AE-C-631496 TT 631496 Valve Guide

Parts eligible for Continental Model IO-470 (T.C 3E1) only:

AE-C-627738 TT 627738 Piston AE-C-627738 G 627738 Piston AE-C-631481 TT 631481 Piston AE-C-631481 G 631481 Piston

Parts eligible for Continental Model TSIO-470 (T.C 3E3) only:

AE-C-635140 TT 635140 Piston AE-C-631540 G 631540 Piston

-END-

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SE910SW

FAA Form 8110-2 (5/14) Page 4 of 3

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 21

MakeModelData sheet
Continental MotorsIO-470-D3E1
Continental MotorsIO-470-E3E1
Continental MotorsIO-470-F3E1
See all 21 models

Every issue · 1

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
October 31, 2016Reissued, currentCertificateApproved model list