What it approves
Manufacture and installation of Axis C gearshaft plugs per Fed Ex Drawing F-72-003, Sheets 1 and 2.
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number SE966SO This certificate issued to: JSF Aviation Services, Inc.
4680 Glenn Curtiss Drive Addison, Texas 75001-3243 Certifies that the change in the type design for the fellowing preduct with the limitations and venditions theraper as specified hereen meet the airierhines requiroments of Part* of the Civil Air Regulations.
*CAR 13 effective June 15, 1956, as amended by Amendments 13-1 through 13-5.
Priginal Reduot-Tpo Cartificato Aimbori E7EA Make: General Electric Aloded: CF700-2C, -2D, and -2D-2 Parting ye Pign Change: Manufacture and installation of Axis "C" gearshaft plugs per Federal Express Drawings F-72-003, Sheets 1 and 2, dated September 21, 1977, and Engineering Order 72-64-F-001, dated September 22, 1971, or later FAA approved data.
Limitations and Conditions: The approval of this change in type design applies to the above referenced models only. This change should not be incorporated on engines on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any other previously approved modifications will produce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of Application: September 16, 1977 Date Reissued: May 5, 2009 Salcamended:
Date of Issuance: .. September 23, 1977 FEDERAL AVIATION Melvin D. Taylor Manager Atlanta Aircraft Certification Office TOMINISTRATIO (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.