What it approves
Install landing gear damper piston.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SH1018CE This certificate issued to
Part 6 of the Civil Air Regulations.
Description of Type Design Change: Install landing gear damper piston in accordance with FAA Approved copy of Milair Drawing No. M3105.
Limitations and Conditions: This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. Parts manufactured and installed under this STC must be approved and marked in accordance with the requirements of FAR 21.303 and FAR 45.15.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Kinzie Industries, Inc.
115 Cheesman St.
Erie, CO 80516 4H12 Make : Schweizer Aircraft Corporation Model : 269A & B
Date of application : April 11, 1974
Date of issuance : May 9, 1974
Date reissued : 5/17/74; February 2, 2010
( Signature) Lance T. Gant, Manager Rotorcraft Certification Office, Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SH868SW Date of Issuance: December 18, 1967 Date Amended: January 16, 1969
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.