What it approves
Install modified landing gear damper.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SH1047CE This certificate issued to
Part 6 of the Civil Air Regulations.
Description of Type Design Change: Install modified landing gear damper in accordance with FAA Approved copy of Milair Drawing List No. 269A and subordinate data.
Limitations and Conditions: This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. Parts manufactured under this STC may have been produced without an FAA approved quality control procedure. Prior to installation, such parts must be inspected for conformity and airworthiness in accordance with FAR’s 21 and 43. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Kinzie Industries, Inc.
115 Cheesman St.
Erie, CO 80516 4H12 Make : Schweizer Aircraft Corporation Model : 269A and B
Date of application : July 30, 1974
Date of issuance : August 15, 1974
Date reissued : 10/7/74; February 2, 2010
( Signature) Lance T. Gant, Manager Rotorcraft Certification Office, Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SH868SW Date of Issuance: December 18, 1967 Date Amended: January 16, 1969
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.