What it approves
Installation P/N 364-83300-1 (Standard Skid Gear) or P/N 364-83300-3 (High Skid Gear). This Wire Strike Protection System
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA 8110-2 (10/24) Page 1 of ___ IMPORT SH1201SO Magellan Aerospace 660 Berry Street Winnipeg, Manitoba Canada R3H 0S5 Part 7 the Civil Air Regulations.
H1SW Bell Textron Inc.
204B, 205A-1
1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
2. The installer must determine whether this design change is compatible with previously approved modifications.
3. This STC is applicable to all serial numbers for these Make-Models.
07/28/1980 06/14/2001 09/12/2025 02/02/1981 03/25/2002 03/09/2026 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3 Configuration #1 - Installation P/N 364-83300-1 (Standard Skid Gear) or P/N 364-83300-3 (High Skid Gear)
1. This Wire Strike Protection System installation must be in accordance with Magellan Aerospace, Winnipeg document EM105301, Drawing List – Bell 204, 205, 210, 212, 412 Wire Strike Protection System (WSPS), Issue F, approved June 30, 2011, or later Transport Canada Civil Aviation (TCCA) approved revision.
2. Maintenance of the WSPS installation must be in accordance with Magellan Aerospace, Winnipeg document PM-965-041, Bell Models 204, 205, 210, 212 and 412 Maintenance Manual Supplement and Illustrated Parts List, Issue C, dated April 17, 2007, or later TCCA accepted revision.
Configuration #2 - Installation P/N 364-83100-5, P/N 364-83100-7, P/N 364-83100-9, P/N 364-83100-15, or P/N 364-83100-17
1. This Wire Strike Protection System installation must be in accordance with Magellan Aerospace, Winnipeg document EM104802, Drawing List – Bell 204, 205, 212, and 412 Wire Strike Protection System (WSPS), Issue A, approved September 14, 1999, or later TCCA approved revision.
2. Maintenance of the WSPS installation must be in accordance with the Appendix to Magellan Aerospace, Winnipeg document ER80073, Installation Instructions for Bristol Aerospace Limited Wire Strike Protection System on Bell 204 Model Helicopters, Issue J, dated March 1, 1994, and Magellan Aerospace, Winnipeg document ER80074, Installation Instructions for Bristol Aerospace Limited Wire Strike Protection System on Bell 205 Model Helicopters, Issue J, dated March 1, 1994, or later Transport Canada accepted revisions.
----------END---------- 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.