What it approves
Installation of Aircraft Parts Corporation s (APC) Starter-Generator, P/N 200SGL111Q or 200SGL132Q
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2(10-68) Page 1 of 1 United States of America Department of Transportation -- Federal Aviation Administration Supplemental Type Certificate Number SH123NE Reissued on July 21, 2004 to supercede the original STC which has been lost, misplaced or stolen.
This certificate issued to
Part 6 of the Civil Air Regulations.
Installation of Aircraft Parts Corporation’s (APC) Starter-Generator, P/N 200SGL111Q or 200SGL132Q in accordance with Aircraft Parts Corporation Drawing No. 200SGL1131, Revision D, dated April 13, 1993 entitled “Installation Instructions Bell 206L-1 Series Aircraft.”
1. Helicopter must have a cockpit loadmeter red-lined at 83%.
2. Bell Helicopter Alert Service Bulletin No. 206L-81-20, dated April 24, 1981, must be complied with.
3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
4. The installer must determine whether this design change is compatible with previously approved modifications.
Skurka Aerospace Inc.
4600 Calle Bolero, Box 2869 Camarillo, CA 93011 H2SW Make: Bell Helicopter Model: 206L-1
Date of application: September 5, 1982
Date of issuance: February 10, 1983
Date reissued: July 21, 2004, August 9, 2004 July 30, 2009 Date amended: May 3, 1993
( Signature) Anthony Socias Manager New York Aircraft Certification Office
( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron (Canada) | 206L-1 | H2SW |