What it approves
Fabrication and installation of camera mount and photographer's seat.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
SH1244SO Ephraim Nowak 535 Buena Vista Ave, Apt 109 Alameda, CA 94501, USA Part 6 Civil Air Regulations H2SW Bell 206A, 206B, 206L, 206L-1, 206L-3 Fabrication and installation of camera mount and photographer's seat in accordance with Greenlee Space Ace Camera Mount and Photographer's Seat Drawing List, dated December 13, 1982, or Super Space Ace Camera Mount Drawing List dated November 5, 1984, or later FAA approved revisions.
The approval of this change applies basically to Bell Models 206A, 206B, 206L, 206L-1, 206L-3 helicopters only. This approval should not be extended to other helicopters of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications... (Continued on Page 3) March 16, 1981 December 8, 2023 June 16, 1981 December 17, 1981, January 18, 1983, November 30, 1984 (for) Christina M. Underwood Manager, East Certification Branch 3
SH1244SO 3
SH1244SO Limitations and Conditions: (Continued) ... will produce no adverse affect upon the airworthiness of that helicopter. This determination should include consideration of significant changes in weight distribution such as an increase in the fixed disposable weight in the fuselage. Maintenance and inspection of the installation shall be conducted in accordance with Camera Mount Maintenance Procedure and Safety precautions, dated December 13, 1982.
----------------------------------------END------------------------------------------ 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.