What it approves
High Skid Landing Gear
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
N umber SH1392SO This certificate issued to
Part 6 of the Civil Air and Part 21.29 of the Federal Aviation R egulations .
Original Product -- Type Certificate N umber :
High Skid Landing Gear in accordance with Aeronautical Accessories, Inc. Drawing List Report KR-177, No Revision, dated May 19, 1982, and installation per Report AA-90054, Revision E, dated March 24, 2003, Report AA-91051, Revision E, dated August 20, 2002, Report AA-94063, No Revision, dated September 7, 1994, Report AA-94091, No Revision dated December 23, 1994, Report AA-95002, Revision D, dated March 24, 2003, or Report AA-03024, No Revision, dated March 19, 2003 or later FAA/DAS approved revisions.
Bell Helicopter Textron, Inc.
441 Industrial Park Road Piney Flats, TN 37686 H2SW M ake : Bell Helicopter Textron Canada Limited M odel : 206A, B Date of application : April 20, 1982
Date of issuance : December 13, 1982
Date reissued : May 29, 2013
Date amended : 4/8/85; 7/23/85;
10/20/87; 3/11/98; 6/6/03
B y di rection of the A dministrator
(Signature) Scott A. Horn, Acting Manager, Rotorcraft Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SH1392SO Date of Issuance: December 13, 1982 Date of Reissuance: May 29, 2013
The Rotorcraft Flight Manual Supplement, Report No. AA-85011, dated April 8, 1985, Report No. AA-85012, dated April 8, 1985, or Report NO. AA-85025, dated October 20, 1987 or later FAA/DAS approved revisions and the Instructions for Continued Airworthiness, Aeronautical Accessories, Inc. Report AA-01143, Revision A, dated March 25, 2003, and AA-01147, Revision B, dated September 17, 2002, or later AEG accepted revisions are required. Model 206A, S/N’s 3 through 153, must comply with Service Instructions 206-36. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
-END-
ADs that name this STC · 1
An AD can apply because an STC is installed, or mention one in its text.