STC SH13WE

Part 6 of the Civil Air R egulations.

Original Product --Type Certificate N umber :

Conversion of Bell Model 47D1 to: (1) Model 47G-2 in accordance with Drawing List No. 602-1, Revision B, dated October 3, 2001 or later Federal Aviation Administration (FAA) approved revision; (2) Model 47G in accordance with Drawing List No. 602-2, Revision B, dated October 3, 2001, or later FAA Approved revision.

Conversion of Bell Model 47G to Model 47G-2 in accordance with Drawing List No. 602-3, Revision B, dated October 3, 2001, or later FAA approved revision. These helicopters must be operated in accordance with the appropriate Bell 47G or 47G-2 FAA approved Rotorcraft Flight Manual.

This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.

Scott’s-Bell 47, Inc.

100 Minnesota Avenue Le Sueur, MN 56058

H-1 M ake : Bell Helicopter Textron M odel : 47D1; 47G Date of application : October 01, 1963

Date of issuance : October 17, 1963 Date reissued : July 27, 1987; January 22, 2002;

April 30, 2004; December 15, 2010; August 7, 2014

Date amended : December 21, 2001

B y direction of the A dministrator

Original Signed By:

Karol Mordasiewicz (Signature) Karol Mordasiewicz Manager, Airframe and Administrative Branch Chicago Aircraft Certification Office

(Title)

FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES

N umber

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SH13WE Date of Issuance: October 17, 1963 Date of Amended: December 21, 2001 Date of Reissuance: August 7, 2014 Limitations and Conditions:

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other pers on written evidence of that permission.

NOTE: FAA conducted production flight test is required prior to issuance of individual airworthiness certificate. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

------------End-----------