What it approves
Installation of externally mounted ferry tanks.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SH1618NM
This certificate, issued to Erickson Air-Crane, Inc.
dba Erickson Air-Crane 3100 Willow Springs Road Central Point, OR 97502 Part 29 of the Federal Aviation Regulations.
Original ProductType Certificate Number: H6EA Make: Erickson Model: S-64E and S-64F Description of the Type Design Change: Installation of externally mounted ferry tanks in accordance with Erickson Air-Crane Master Drawing List, Document 1052, Revision C, dated August 23, 1993, or later FAA approved revision.
Limitations and Conditions: Approval of this change in type design applies to the above model rotorcraft only.
This approval should not be extended to other rotorcraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. A copy of this Certificate and FAA Approved Rotorcraft Flight Manual Supplement (AFMS) dated November 23, 1982, for the S-64E, and September 7,1993, for the S- 64F, or later FAA approved revisions, must be maintained as part of the permanent records for the modified rotorcraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: April 19, 1982 Date reissued: 08/22/97; 03/01/01 Date of issuance: April 26, 1982 Date amended: 07/07/93; 03/01/01
(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.