STC SH2530NM

United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate This certificate has been reissued to replace the original certificate reported as lost.

This Certificate issued to Allen J. Gerbino Gerbino Flight Systems 2549 North Palm Drive Signal Hill, California 90755 Part 6 of the Civil Air Regulations. See Type Certificate Data Sheet No. H3WE for a complete Certification Basis.

H3WE

MDHI

369, 369A, 369H, 369HM, 369HS, 369HE, 369D, 369E, 369F, 369FF, 500N Description of Type Design Change: Installation of quick removal door hinges in accordance with FAA Approved Alexair Indentured Drawing List No. 819-1000, no change, dated October 7, 1984, or later FAA approved revisi on or FAA Approved Alexair I ndentured Drawing List No.

902-1000, No Change, dated May 17, 1992, or later FAA approved revision.

Limitations and Conditions: The approval of this change in type design applies to the basic rotorcraft of the specified models that are otherwise unmodifi ed. This approval should not be extended to other rotorcraft of these models on which other previously approved modifications are incorporated, unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that rotorcraft. If the holder agrees to permit another person to use this certif icate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application : March 17, 1982

Date of issuance : October 25, 1984

Date reissued : May 29, 2012

Date amended : March 23, 1994

( Signature) Haifa Haj-Eid Supervisor, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office ( Title)

NOTE:

DO NOT DELETE THIS PAGE.

DO NOT ADD ANY DATA TO THIS PAGE.

THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.

Number