STC SH2605NM

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SH2605NMs This certificate issued to: University of Washington Polar Science Center Certifies that the change in the type design for the fellowing product with the limitations and conditions therefer as specified heren meets the aimerthiness requirements sf Part 6 of the Civil Air Regulations:, dated December 20, 1956.

Original Product - Type Certificate Number: H2SW Make Bell Model: 206B Description of Type Design Change:

Installation of an external mounted vertically looking 35/70 mm camera system (Assembly A) and a Photometer Installation (Assembly B) in accordance with Applied Physics Laboratory Drawing List No. 95514 and Figures 1B through 4B respectively.

Approval of this change in type design applies to the above Limitations and Conditions: model aircraft only. This approval should not be extended t‹ aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate, and FAA Approved Rotorcraft Flight Manual Supplement, dated May 25, 1984, or later FAA Approved Revision must be maintained as part of the permanent records for the modified aircraft This certificate and the supporting data which is the basis for approval shall semain in effect until sur rendered, suspended, revked, or a termination date is sherwise established by the Administrater of the Federal Aviation Administration Date of Application: April 16, 1984 Date Reissued:

Late s/ issuance: May 25, 1984 Date Amended:

FEDERAL AVIATION Charle sihreder ( Signature ) CHINIST RATO Manager, Seattle Aircraft Certification Offic (Title)