What it approves
Modification of the external loads lifting pendant and system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SH2908NM
This certificate, issued to Erickson Air-Crane, Inc.
dba Erickson Air-Crane 3100 Willow Springs Road Central Point, OR 97502 Part 29 of the Federal Aviation Regulations.
Original ProductType Certificate Number: H6EA Make: Erickson Model: S-64E Description of the Type Design Change: Modification of the external loads lifting pendant and system, in accordance with Erickson Air-Crane Master Drawing List No. 85FS018, dated April 12, 1985, or later FAA approved revision.
Limitations and Conditions: Approval of this change in type design applies to the above model rotorcraft only.
This approval should not be extended to other rotorcraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. A copy of this Certificate and FAA Approved Rotorcraft Flight Manual Supplement dated June 26, 1985, or later FAA approved revision must be maintained as part of the permanent records for the modified rotorcraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: April 13, 1983 Date reissued: 08/22/97; 03/01/01 Date of issuance: June 26, 1985 Date amended: 03/01/01
(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Erickson Air-Crane Company | S-64E | H6EA |