STC SH2953NM

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SH2953NM This certificate issued to: Heli-Conversions, INC.

Certifies that the change in the type design for the following poduct with the limitations and conditions therefor as specified heron meets the airwothiness sequirements of Part 6 of the CIVII AIT Regulations:

Original Product -Type bertificate Number: HASW Make: Be11 Model: 205A-1 Description of Type Design Change: in either left or right seat with fully redundant Pilot-in-Command position:

controls and control-mounted switches, in accordance with Heli-Conversions, Inc.

Drawings 1 and 2, dated 6/12/85 and 4 photos same date.

NOTE: This STC requires: Complete Bell co-pilot instrument kit, external load release switch on cyclic control, throttle start button, flight idle stop, and other items per STC SH2691NM.

Data pertaining to this modification are considered inadequate for duplication in other aircraft. This approval is limited to Pilot-in-Command operation from the left or right seat on Bell Model 205A-1 Rotorcraft, Serial Number 30265 only. The modified rotorcraft must be operated in accordance with an FAA approved copy of the Rotorcraft Flight Manual Supplement dated June 12, 1985, or later FAA approved revision. A copy of this Certificate and the Rotorcraft Flight Manual Supplement must be carried in the

Date of Application: February 5, 1985 Date Reissued: December 1, 1986 Date of Issuance: June 12, 1985 Date Amended:

FEDERAL AVIATION By Direction of the Administrator D. L. Kein Acting Manager, Sedit y TRIN STRATOR Aircraft Certification Office (Title)

47.