What it approves
Installation of replacement skid tubes.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
N umber SH3260SO This certificate issued to
Part 7 of the Civil Air R egulations .
Original Product -- Type Certificate N umber :
Installation of replacement skid tubes in accordance with Aeronautical Accessories, Inc. Drawing List, Report number AA-92002, Revision K, dated February 27, 2002, or later FAA approved revisions.
Instructions for Continued Airworthiness, Aeronautical Accessories, Inc. Report No.
AA-01139, Revision B, dated February 27, 2002, or later FAA accepted revision is required. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
This certif icate and the supporting data which is the basis for approval shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.
Bell Helicopter Textron, Inc.
441 Industrial Park Road Piney Flats, TN 37686 H1SW M ake : Bell Helicopter Textron, Inc.
M odel : 205A, A-1 and 205B Date of application : December 4, 1991
Date of issuance : June 12, 1992
Date reissued : November 26, 2012
Date amended : April 18, 2002
B y direction of the A dministrator
(Signature) Scott A. Horn, Acting Manager, Rotorcraft Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.