STC SH3582SW

N umber SH3582SW This certificate issued to

Part 6 of the Civil Air R egulations.

Original Product -- Type Certificate N umber :

Installation of left rear sliding door in accordance with Bell Helicopter Australia Drawing List No. 8474-01-00, Revision 2, dated February 18, 1985, or later FAA approved revision for Bell Model 206B. Installation of left or right sliding passenger door assemblies in accordance with Aeronautical Accessories Installation Instructions Report AA-87018, Revision F, dated March 26, 1990 for Bell Models 206A/B or Report AA-87019, Revision G, dated March 26, 1990 for Bell Models 206L/L-1/L-3/L-4, or later FAA approved revisions. Assemblies are manufactured in accordance with Aeronautical Accessories Drawing List Report AA-87022, Revision E, dated August 20, 1990, or later FAA approved revision for Bell Models 206A/B/L/L-1/L-3/L-4.

Bell Helicopter Textron, Inc.

441 Industrial Park Road Piney Flats, TN 37686 H2SW M ake : Bell Helicopter Textron Canada Limited

M odel : 206A, 206B, 206L, 206L-1, 206L-3, 206L-4 Date of application : October 11, 1984

Date of issuance : February 28, 1986

Date reissued : February 17, 1987;

July 31, 1987; November 26, 2012

Date amended : 1/21/88; 3/1/88; 3/24/88;

10/23/90; 10/5/92; 7/26/95

B y direction of the A dministrator

(Signature) Scott A. Horn, Acting Manager, Rotorcraft Certification Office, Southwest Region

(Title)

FAA Form 8110-2-1(10-69) Page 2 of 3

FAA Form 8110-2-1(10-69) Page 3 of 3

Number SH3582SW Date of Issuance: February 28, 1986 Date of Reissuance: November 26, 2012

FAA approved Rotorcraft Flight Manual Supplement dated February 28, 1986, or later FAA approved revision, is required for operation of the Bell Models 206A and 206B. FAA approved Rotorcraft Flight Manual Supplement dated January 21, 1988, or later FAA approved revision, is required for operation of the Bell Models 206L, L-1, L-3, and L-4. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

-END-