What it approves
Installation of dual patient litters.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SH3737SW
This Certificate issued to
certifies that the change in the type design for the following product with the limitations and conditions therefor as specified hereon meets the airworthiness requirement6 of Part 27 * of the Federal Aviation Regulations.
*Certification basis is set forth in Type Certificate Data Sheet H11EU.
Description of Type Design Change: Installation of Dual Patient Litters in accordance with Consolidated Aire Systems Drawing List Report Number DL-21, Revision A, dated February 28, 1987, or later FAA approved revision.
Limitations and Conditions: Compatibility of this design change with previously approved modifications must be determined by the installer. This approval should not be extended to rotorcraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. A copy of this certificate must be maintained as part of the permanent records for the modified rotorcraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
RSG Products, Inc.
3900 Falcon Way West, Hangar 16S Fort Worth, TX 76106 H11EU
Airbus Helicopters
AS355E, AS355F, AS355F1, AS355F2 Original Product Type Certificate Number:
Date of application : December 31, 1986
Date of issuance : March 6, 1987
Date reissued : September 10, 2001, August 15, 2014
(Signature) Supervisor, Technical & Administrative Support Staff Los Angeles Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.