What it approves
Installation of Pneumatic Door Actuators
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate Number SH4061NM
Date of application: June 5, 1989 Date reissued: November 24, 2014 Date of issuance: November 9, 1989 Date amended: January 24, 1991
Todd Dixon (Signature) Manager, Denver Aircraft Certification Office Northwest Mountain Region (Title)
This certificate, issued to Air Comm Corporation 1575 West 124th Ave Westminster, CO 80234 Part 6 of the Civil Air Regulations.
Original ProductType Certificate Number: H1CE Make: Enstrom Model: 280C, 280F, 280FX, F-28A, F-28C, F-28F Description of the Type Design Change:
Installation of Pneumatic Door Actuators in accordance with FAA Approved Drawing List DL– 280DA, Rev A, FAA approved on November 9, 1989 or later FAA approved revision.
1. The following placard must be displayed on each Actuator “REMOVE WHEN DOOR IS REMOVED”
2. Approval of this change in type design applies to the model of aircraft listed above only.
3. Compatibility of this design change with previously approved alterations must be determined by the installer.
4. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
5. A copy of this certificate and the appropriate flight manual supplement as listed above must be maintained as part of the permanent record for the altered aircraft.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 6
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| November 24, 2014 | Reissued, current | Certificate |
| January 24, 1991 | Amended, earlier issue | Certificate |