STC SH410SW

Part 6 of the Civil Air R egulations.

Original Product --Type Certificate N umber :

Mount sign to skid gear on both sides of helicopter as per Drawing KK 1124, Weight approximately 8 pounds; all on C.G.

1. Data pertaining to this modification are considered inadequate for duplication in other aircraft. This approval is limited t o the installation made in Bell Model 47G-2, Serial No. 833, only.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holde r must give the other person written evidence of that permission.

This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.

Scott’s-Bell 47, Inc.

100 Minnesota Avenue Le Sueur, MN 56058

H-1 M ake : Bell Helicopter Textron M odel : 47G-2 Date of application : July 16, 1964

Date of issuance : July 16, 1964 Date reissued : April 30, 2004; December 15, 2010;

August 7, 2014

Date amended : February 7, 1966; November 22, 1974 Rev. 2

B y direction of the A dministrator

Original Signed By:

Karol Mordasiewicz (Signature) Karol Mordasiewicz Manager, Airframe and Administrative Branch Chicago Aircraft Certification Office

(Title)

FAA FORM 8110-2-1(10-69) PAGE 2 of 2 PAGES

N umber SH410SW