What it approves
Installation of passenger door wedge window assembly.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
SH4225SW The NORDAM Group LLC 6910 N. Whirlpool Tulsa, OK 74117 Part 6 the Civil Air Regulations H2SW Bell Textron Canada Limited 206A, 206B, 206L, 206L-1, 206L-3, 206L-4 Installation of Passenger Door Wedge Window Assembly in accordance with Ten Cate Drawing 206-110, Rev. F, dated 10-23-92, or later FAA approved revision.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
September 3, 1980 5/19/93; 8/25/93; 1/1/97; 9/20/99; 4/1/2019 October 31, 1980 11/24/82; 6/15/84; 4/13/93 Rev. 3 Jim Grigg Manager, Fort Worth ACO Branch, Compliance & Airworthiness Division Aircraft Certification Service 2
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
SH4225SW 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.