What it approves
Fabrication of Simplex Model 7900 spray booms and tank
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SH4377NM
This certificate, issued to Simplex Manufacturing 13340 N.E. Whitaker Way Portland, OR 97230
Part 27 of the Federal Aviation Regulations.
Original ProductType Certificate Number: H2SW Make: Bell Model: 206L, 206L-1, 206L-3, and 206L-4
Description of the Type Design Change: Fabrication of Simplex Model 7900 spray booms and tank in accordance with Simplex Master Drawing List (MDL) MDL7900, Revision Q, dated October 24, 2013, or later Federal Aviation Administration (FAA) approved revision. Installation in accordance with Simplex Installation Manual 790-102002-001, Revision A, dated October 30, 2013, or later FAA-approved revision.
Limitations and Conditions: Approval of this change in type design applies to the above model rotorcraft only.
This approval should not be extended to other rotorcraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. The modified rotorcraft must be operated in accordance with the FAA-approved Rotorcraft Flight Manual Supplement (RFMS) FMS7900, Revision B, dated November 13, 2013, or later FAA-approved revision and must be maintained in accordance with Simplex Maintenance Manual MM7900, dated August 31, 1988, or later FAA-approved revision. A copy of this certificate, the FAA-approved RFMS, and the maintenance manual must be maintained as part of the permanent records for the modified rotorcraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: July 7, 1988 Date reissued:
Date of issuance: November 10, 1988 Date amended: July 5, 1994; December 6, 2013
(Signature)
Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 4
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| December 6, 2013 | Amended, current | Certificate |
| July 5, 1994 | Reissued, earlier issue | Certificate |