What it approves
The Pilot-In-Command postiion to be located in the left seat.
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number 544380N11 This certificate issued to: Croman Corporation Part 6 of the CIVII Air Regulations:
Original Product - Type bertificate Number: H2SW Мако: Be11 Model: 206B Desoriplion JupeDesign Change: The Pilot-in-Command position to be located in the Lei seat, in accordance with Croman Corporation Collective Pitch Package, dated October 13, 1988, and four (4) photos, same date.
NOTE: This STC requires Co-pilot instruments, external load release switch on cyclic control.
Collective pitch control includes throttle, start button, flight idle stop and other items.
Limitations and Conditions: Data pertaining to this modification are considered inadequate for duplication in other rotorcraft. This approval is limited to Pilotin-Command operation from the left seat on Bell Model 206B rotorcraft, Serial Number 1463 only. The modified rotorcraft must be operated in accordance with an FAA approved copy of the Rotorcraft Flight Manual Supplement dated December 8, 1988, or later FAA approved revision. A copy of this Certificate and Rotorcraft Flight Manual Supplement shall be maintained as part of the permanent records for the modified aircraft.
Date of Application: Apr11 7, 1988 Jute wissued:
Date of Issuance: December 8, 1988 Date Amended:
FEDERAL AVIATION By Direction of the Administrator (Signature *MINISTRATOR Acting Manager, Seattle Aircraft Certification Office (Title) 47 FAA FORM 8110-2 (10-68)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron Canada Limited | 206B | H2SW |