What it approves
Fabrication and installation of Airglas Engineering Company, Inc. P/N L8500A-1 left ski and P/N L8500A-2 or P/N L8500R-2 right ski
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to
Part 29* of the Federal Aviation Regulations.
Description of Type Design Change: Fabrication and installation of Airglas Engineering Company, Inc. P/N L8500A-1 left ski and P/N L8500A-2 or P/N L8500R-2 right ski in accordance with Airglas Engineering Company, Inc. Master Drawing List No. L8500AR212, Original Issue, dated October 7, 1998, or later FAA approved revision.
Limitations and Conditions: Compatibility of this design change with previously approved modifications must be determined by the installer. FAA approved Rotorcraft Flight Manual Supplement for Bell 212 Helicopter, Revision 3, dated December 21, 1998, or later FAA approved revision, is a required part of this installation.
The holder of this Certificate will provide each person it permits to use the Certificate to alter one or more helicopters with written evidence of that permission in a form acceptable to the Administrator
3500 O’Malley Rd Anchorage, AK 99507
H4SW Make : Bell Helicopter Textron Model : 212
Date reissued : June 20, 1988; August 14, 2012
Date amended : May 22, 1973; June 10, 1974;
June 20, 1988; December 21, 1998
(Signature) August A. Asay Manager, Anchorage Aircraft Certification Office
(Title) Date of application : February 24, 1971
Date of issuance : September 24, 1971
*Complete certification basis is specified in Type Certificate Data Sheet No. H4SW, Rev 23
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron Inc. | 212 | H4SW |