STC SH4719NM

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number SHA719NM This certificate issued to: Fly Wright Corp.

34839 Pacific Highway South Federal Way, WA 98003-8397 Part 27 of the Federal Aviation Regulations: and FAR 21.29 effective 2/1/65, plus Amendments 27-1 through 27-10 plus FAA Special Conditions and Equivalent Safety items as listed on the Type Certificate Data Sheet.

Original Product - Type Certificate Number: H9EU Make: Aerospatiale Model: AS-350B Description of Type Design Change: Install additional support angles around the underfloor access panel and an adapter (interface) plate in accordance with W. P. Jennings & Associates, Inc., Sketch 89- 1200, Sheets 1 and 2, dated April 11. 1989, or later FAA approved revision, and a Tyler camera mount assembly in accordance with Tyler Installation Instructions Report No. TCS-107, Rev. C, dated August 1, 1985, as amended by W. P. Jennings Installation Instructions No. 1040, dated April 13, 1989, or later FAA approved revision.

Limitations and Conditions: Approval of this change in type design applies basically to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate and FAA Approved Rotorcraft Flight Manual Supplement dated April 26, 1989, or later FAA approved revision, must be maintained as part of the permanent records for the modified aircraft..

Date of Application: February 13, 1989 Date Reissued: November 2, 1995 Date of Issuance: April 12, 1989 Date Amended: April 26, 1989 FEDERAL AVIATION By divection of the s (Signature) SOMINIST RATIO Acting Manager, Seattle Aircraft Certification Office (Title)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SH4719NM Limitations and Conditions: continued:

NOTE: All cameras with an independent 12V DC power supply that will accept the Tyler camera tray, Part Number TYL-206-007, are authorized. Weight of the camera, with magazine and film, must not exceed 20 Ibs. Maximum frontal area of these parts not to exceed 0.9 square feet.

- END -

FAA FORM B110-2-1 (10-69) PAGE 3 OF 3 PAGES