What it approves
Installation of passenger grab bars
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number 5452360M This certificate issued to: Air Methods corporation Part * of the Federal Aviation Regulations:
Original Product -Typeberlificate Number: * see attached Approved Model List (AML.)
Make: * Number SH5236NM for list of approved Model: * rotorcraft models and applicable airworthiness regulations.
Installation of passenger grab bars in accordance with Air Methods Corp.
Master Drawing List 141-9009, dated October 25, 1991 or later FAA approved revision.
Approval Limitations and Conditions: of this change in type design applies to the above model aircraft only. This approval should not be extended to aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft.
Date of Application: October 25, 1991 Date Reissued:
Date of Issuance: January 30, 1992 Date Amended:
EDERAL ANTATION By Direction of the Administrator Richard E. Jennings Signature) Supervisor TOMINI STRAND Denver Aircraft Certification Field Office Northwest Mountain Region, Denver, Colorado (Titte)
FAA FoRM 8110-2 (10-6B]
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 4
Every issue · 1
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| January 30, 1992 | Issued, current | CertificateApproved model list |