What it approves
Installation of 'Pop-Out' wedge window assembly.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
SH5861SW The NORDAM Group LLC 6910 N. Whirlpool Tulsa, OK 74117 Part 6 the Civil Air Regulations H2SW Bell Textron Canada Limited 206A, 206B, 206L, 206L-1, 206L-3, 206L-4 Installation of "Pop-Out" Wedge Window Assembly in accordance with Drawing No. 206-110, Revision F, dated 10/23/92, and Passenger Door Wedge Window Assembly, P/N 206-110-21/-22/-27/-28, Installation Instructions, I.R. dated 11/19/84, or later FAA approved revision.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
December 19, 1984 5/19/93; 8/25/93; 1/1/97; 9/20/99; 4/1/2019 January 3, 1985 May 5, 1997 Rev. 1 Jim Grigg Manager, Fort Worth ACO Branch, Compliance & Airworthiness Division Aircraft Certification Service 2
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
SH5861SW 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.