What it approves
Installation of landing gear skid tubes.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SH5889NM
This Certificate issued to
Part CAR 6* of the Civil Air or Regulations.
*For certification basis see Type Certificate Data Sheet H11N.
Description of Type Design Change: Installation of Landing Gear Skid Tubes in accordance with FAA approved Heli-Support, Inc. Master Document List (MDL) No. 268-000, dated August 18, 1993, Revision A, and HSI Report
315.7543.06, Weight and Balance for Installation of Replacement Skid Tubes, or later FAA approved revisions.
Limitations and Conditions: This installation should not be incorporated in any aircraft, unless it is determined that the interrelationship between this change and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Heli-Support, Inc.
120 N. E. Frontage Rd.
Ft. Collins, Colorado 80524 Original Product Type Certificate Number :
H11N
Aerospatiale
SA315B Date of application : July 30, 1992
Date of issuance : February 22, 1993
Date reissued : August 13, 2004, July 15, 2009
Date amended : August 31, 1993
( Signature) Manager, Airframe Branch Los Angeles Aircraft Certification Office
( Title)
Number (STC No.)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Eurocopter France | SA.315B Alouette III | H1IN |