What it approves
Intermixing of main rotor blades of the same part number.
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SH6039NM This certificate issued to: Heli-Support, Inc.
4101 Evans Avenue Cheyenne, WY 82001 Part CAR 6* of the Civil Air Regulations. *(For Certification basis see Type Certificate Data Sheet HIIN) Original Product Type Cerlificate Number: HIIN Make: Aerospatiale Model: SE 3160, SA 316B, SA 315B, SA 319B, SA 316C Alouette IIII Description of Type Design Change: Intermixing of Main Rotor Blades of the same part number for Aerospatiale models listed above in accordance with FAA approved Heli-Support, Inc. Master Document List MDL-HSI-3160-50 Rev. N/C dated June 1, 1993, or later FAA approved revisions.
Limitations and Conditions: This installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this change and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of Application: July 30, 1992 Date Reissued: July July 2004 Date of Issuance: July 19, 1993 Date Amended:
FEDERAL AVIATION By Direction of the Administrator Calk K. Woo (Signature) TOMINSTRATO Manager, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.