What it approves
Centerframe modification or replacement and installation of Lycoming VO-435 engine in lieu of Franklin installation and optional lateral control system.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 6 of the Civil Air R egulations.
Original Product --Type Certificate N umber :
Centerframe modification or replacement and installation of Lycoming VO-435 engine in lieu of Franklin installation and optional lateral control system for Bell Model 47D1 or 47G according to UTL Aeronautics, Inc. Instruction Sheet for the modification of a 47D1 or 47G to use a Lycoming engine, Rev. A, dated 1/16/74 or later FAA approved revision.
Battery installation per STC SH283SW for Model 47D1 only.
This certificate and the supporting data, which is the basis for approva l, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.
Scott’s-Bell 47, Inc.
100 Minnesota Avenue Le Sueur, MN 56058
H-1 M ake : Bell Helicopter Textron M odel : 47D1, 47G Date of application : November 30, 1966
Date of issuance : January 31, 1967 Date r eissued : March 4, 1986; July 27, 1987; April 30, 2004;
December 15, 2010; August 7, 2014
Date amended : January 16, 1974; November 22, 1974 Rev. 2
B y direction of the A dministrator
Original Signed By:
Karol Mordasiewicz (Signature) Karol Mordasiewicz Manager, Airframe and Administrative Branch Chicago Aircraft Certification Office
(Title)
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
N umber SH752SW
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SH752SW Date of Issuance: January 31, 1967 Date of Reissuance: August 7, 2014 Limitations and Conditions :
1. FAA Approved Rotorcraft Flight Manual Supplement dated January 31, 1967, is required for Model 47D1.
2. FAA Approved Rotorcraft Flight Manual Supplement dated January 16, 1974, is required for Model 47G.
3. The installer must determine whether this design change is compatible with previously approved modifications
4. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other pers on written evidence of that permission.
------------End-----------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 2
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| August 7, 2014 | Reissued, current | Certificate |
| December 15, 2010 | Reissued, earlier issue | Certificate |