What it approves
Installation of a bleed air heater for the Bell Model 222
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of 2
Number: SH8003SW
Part 29 of the Federal Aviation Regulations.
Original Product – Type Certificate Number: H9SW Make: Bell Helicopter Textron A Division of Textron Canada Model: 222, S/N 47012 Description of Type Design Change:
Installation of a bleed air heater for the Bell Model 222 in accordance with Heli-Dyne drawing HD222-00-0050, Rev. A, Dated 4/29/91 or later FAA approved revision.
Data pertaining to this alteration are considered inadequate for duplication in other products. This approval is limited to the installation made in Bell Model 222 Serial No. 47012 only. STC SH7835SW must be installed with this STC. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Date of Application: February 6, 1991 Date Reissued: March 3, 2017 Date of Issuance: May 1, 1991 Date Amended:
Signature
Title James A. Grigg Manager, Fort Worth Aircraft Certification Office, Southwest Region RSG Products 3900 Falcon Way, Hangar 16S Fort Worth, TX 76106
FAA Form 8110-2 (5/14) Page 2 of 2
Transfer the ownership of Supplemental Type Certificate Number: SH8003SW
To (Name and address of transferee)
From (Name and address of grantor)
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST10962SC
FAA Form 8110-2 (5/14) Page 3 of 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron A Division of Textron Canada | 222 | H9SW |