STC SH891NW

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SH891NW This certificate issued to: Simplex Manufacturing Company Purt 6 of the CiViI Air Regulations:

Original Product - Typebertificate Number: 2H3 Make: Be11 Model: 47G Series Description of Type Design Change: Installation of a Simplex Manufacturing Company Model 5600 spray system in accordance with model 5600 spray system Drawing List.

Limitations and Conditions: Approval of this change in type design applies basically to the above model helicopter only. This approval should not be extended to other helicopters of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that helicopter.

See "Continuation Sheet" Page 3

Date of Application: March 28, 1979 Date Reissued:

Date of Issuance: . February 21, 1980 Date Amended:

FEDERAL AVIATION Action of the Admiristrator · (Signature ) TOMINISTRATOE Chief, Engineering and Manufacturing Branch (Title)

47.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) February 21, 1980 Number: SH891NW Limitations and Conditions: (continued): A copy of this Certificate, Addendum Number: SH891NW and FAA Approved Rotorcraft Flight Manual Supplement shall he maintained as part of the permanent records for the modified helicopter.

Supplemental Type Certificate ADDENDUM NO. SH891NW Limitations and Conditions: of Type Certificate No. 2H3 apply except as follows:

This STC Addendum, which is part of Supplemental Type Certificate No. SH891NW, prescribes the conditions and limitations under which the product for which the STC was issued meets the airworthiness requirements of the certification hasis * stated herein. A copy of this STC Addendum is required to be maintained as a part of the permanent records for the modified helicopter.

Supplemental Type Certificate HOLDER: Simplex Manufacturing Company BELL 47G SERIES HELICOPTERS AS MODIFIED BY STC SH891NW Airspeed Limits: Skid Gear - CAS: See Rotorcraft Flight Manual Supplement C. G. Range: See Rotorcraft Flight Manual Supplement Number of Seats: 1 pilot at (-30) Maximum Baggage: See loading instructions in FAA Approved Rotorcraft Flight Manual and FAA Approved Rotorcraft Flight Manual Supplement Serial Numbers Eligible: Same as shown on Type Certificate Data Sheet 2H3

- END -

47.

PAGE OF 3 PAGES C FAA AC 73-2651