STC SH963SW

Number SH963SW This certificate issued to

Part 6 of the Civil Air Regulations.

Installation of Bell Model 47G-2A-1 3-place wide cabin on the Bell Model 47G-5, retaining the 47G-5 instruments and pedestal; installation of Bell Kits: L.H. Fuel Tank Kit 47-706-685; Elevator Kit 47-267-485; Night Flying Kit 47-706-689; Dual Control Kit 47-706-609; Spray Kit provisions; Shoulder Harness (L.H. only) 47-706-645; and Rotor Brake Kit 47-706-654 as described in Illustrated Parts Catalog for Model 47G-2A-1 and Model 47G-5.

Texas Helicopter Co., Inc.

780 S. Elmwood Ave.

Le Sueur, MN 56058 2H3 Make : Bell Helicopter Textron Model : 47G-5 Date of application : August 16, 1968

Date of issuance : September 23, 1968

Date reissued : 3/4/86; 7/27/87; 4/30/04;

12/15/10

Date amended : 11/22/74 Rev. 1

( Signature) Scott A. Horn, Acting Manager Rotorcraft Certification Office, Southwest Region

( Title)

FAA Form 8110-2-1(10-69) Page 2 of 3

FAA Form 8110-2-1(10-69) Page 3 of 3

Number SH963SW Date of Issuance: September 23, 1968 Date of Reissuance: December 15, 2010

FAA Approved Rotorcraft Flight Manual Supplement dated September 23, 1968, is required.

Data pertaining to this modification are considered inadequate for duplication in other aircraft. This approval is limited to the installation made in Bell Model 47G-5, Serial No. 7808, only.

The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

-END-