STC SP1774GL

SP1774GL Pegasus Innovations, LLC 45 Buttercup Loop Belton, TX 76513 Part * the * Regulations. * * See attached FAA Approved AML * See attached FAA Approved Model List (AML) No. SP1774GL for list of approved propeller models and applicable airworthiness regulations.

1) The installer must determine whether this design change is compatible with previously approved modifications.

2) Tip modification can not extend beyond (inboard of) the minimum allowable diameter of propellers.

(Continued on Page 3) 4/24/1992 8/26/2015 12/1/2020 7/29/1992 1/5/1995 11/16/1998 for Roy E. Boffo III Deputy Branch Manager Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Service 3 Modify Sensenich propeller by removing propeller tip material to form a 45° chamfer in accordance with Arthur R. Mattson Installation Instructions as listed on AML No. SP1774GL, dated November 16, 1998, or later FAA Approved revision.

SP1774GL 12/01/20 3

SP1774GL 12/01/20 Limitations and Conditions (continued):

3) Refer to propeller Type Certificate Data Sheet for minimum diameters and correct spacer sizes and engine installation eligibilities.

4) A copy of this Certificate and FAA Approved Model List (AML) No. SP1774GL, dated November 16, 1998, or later FAA approved revision, must be maintained as part of the permanent records for the modified aircraft.

5) If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission.

----------------------------------------------------------END---------------------------------------------------- 3 3 Add Page