STC SR00068MC

Number SR00068MC

This certificate issued to: Aerospace Vendor Solutions, Inc 13785 Research Blvd, Suite 125 Austin, Texas 78750 Part 29 of the Federal Aviation Regulations.

Original Product - Type Certificate Number: H10SW Make : Bell Helicopter Textron, Inc.

Model : 214ST Description of Type Design Change:

Installation of Night Vision Imaging System (NVIS) compatible cockpit lighting in accordance with Aerospace Vendor Solutions, Inc., Master Document List, document number 200-214000-MDL, Revision E, dated 10/31/2011 or later FAA approved revision. Aerospace Vendor Solutions, Inc.(AVS) Rotorcraft Flight Manual Supplement, Document Number: 98020214 FMS, Cockpit Infrared Filter System For Bell Helicopter Textron 214 ST, Rev IR, dated 11/07/2011 or later FAA approved revision is required. Aerospace Vendor Solutions, Inc (AVS) Instructions for Continued Airworthiness Document Number: 98020214-ICA, Revision B, dated 10/12/2011, or later revision is required for this installation.

Installation of the NVIS compatible cockpit lighting does not include or imply approval for flight operations with Night Vision Goggles (NVG). (See continuation sheet 3 of 3 for additional limitations)

(Signature) Derek Morgan Manager Military Certification Office (Title)

Date of application: October 26, 2011 Date of issuance: November 07, 2011

Transfer the ownership of the Supplemental Type Certificate Number to (Name of transferee) (Address of transfer) (Number and street)

(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)

(City, State, and Zip code) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):

Number SR00068MC

The operator must receive approval from their FAA operational authority to operate with NVG. Any deviation to the cockpit/cabin configuration specified in the type design of this STC may affect the compatibility of NVIS and may require a re-evaluation for NVG compatibility by the FAA Aircraft Certification Office (ACO). Once the aircraft is modified with this STC, any future modification to the aircraft may also affect the compatibility of NVIS and may require a re-evaluation for NVG compatibility by the FAA ACO. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Certification Basis:

FAA FORM 8110-2(10-68) PAGE 3 of 3 PAGES ------------------------------------------------------END-----------------------------------------------------------