What it approves
Installation of Side-Mounted 104/12 and 104/24 Wescam Camera Pod.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
1016C Sutton Drive, Unit #8 Burlington, Ontario Canada L7L 6B8
Part 6 of the Civil Air Regulations.
Original Product --Type Certificate Number: H2SW
Make : Bell
Model : 206A, 206B
Installation of Side-Mounted 104/12 and 104/24 Wescam Camera Pod in accordance with Field Aviation Co., Inc. Drawing List 33624, Issue 3, dated April 5, 1994
1. Field Aviation Co., Inc. Flight Manual Supplement P/N FACi-6719-01, Rev. 3, Canadian Department of Transportation approved September 24, 1992, is required with this STC.
2. This Supplemental Type Certificate does not include the installation of equipment on the free end of the camera mount’s main support tube (FACi P/N 901558-001). Additional airworthiness approval is required for the installation of equipment on the free end of the camera mount’s main support tube.
3. Compatibility of this design change with previously approved modifications must be determined by the installer.
4. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : April 20, 1992
Date of issuance : May 9, 1994 Date reissued : September 9, 1996, April 13, 2004
( Signature) Anthony Socias Manager New York Aircraft Certification Office
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.