STC SR00120BO

Number SR00120BO

FAA Form 8110-2 (03/21) SUPERSEDES PREVIOUS EDITION Page 1 of 3 This certificate issued to:

Outerlink Corporation 150 Baker Avenue Ext., Suite 302 Concord, MA 01742-2199 Part 27 of the Federal Aviation Regulations.

Original Product - Type Certificate Number: H2SW Make: Bell Helicopter Textron Model: 206A, 206B, 206L, 206L-1, 206L-3, 206L-4

Installation of an OuterLink Corporation CP-3 or CP-3i SATCOM System in accordance with OuterLink Corporation Master Document List No. D000-0056, Revision G, dated January 18, 2007, or later FAA-approved revision.

1. OuterLink Corporation Rotorcraft Flight Manual Supplement No. D000-0076 for the Bell Helicopter Textron Models 206A, 206B, 206L, 206L-1, 206L-3, 206L-4 Helicopters, Revision D, approved June 1, 2007, or later FAA-approved revision, is required with this modification when optional N001-0001 CDU, N004-4000 OCP, N462065001-25 OCCP, or N006-1801 OVP is installed. (continued on Page 3 of 3)

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of Application: January 12, 2000 Date reissued: August 5, 2011; March 29, 2023

Date of Issuance: June 8, 2000 Date amended: September 25, 2000; August 18, 2004; August 3, 2005; January 23, 2007;

June 1, 2007

Signature Nicholas Faust Manager, Boston Aircraft Certification Office Title

Number SR00120BO

FAA Form 8110-2 (03/21) SUPERSEDES PREVIOUS EDITION Page 2 of 3

To (Name and address of transferee) Name:

Address (Number and Street, City, State, and ZIP Code):

From (Name and address of grantor) Name:

Address (Number and Street, City, State, and ZIP Code):

(Continuation Sheet) Number SR00120BO

FAA Form 8110-2 (03/21) SUPERSEDES PREVIOUS EDITION Page 3 of 3 Effective Date: August 5, 2011 Limitations and Conditions: (continued from Page 1 of 3)

2. Instructions for Continued Airworthiness (ICA), OuterLink Document No. D006-9023, Revision B, dated January 19, 2007, or later FAA-accepted revision shall be made available to the operator at the time of installation.

3. Compatibility of this design change with other previously approved modifications must be determined by the installer.

4. Use of Electronic Flight Bag (EFB) with optional N004-4000 OCP shall be in accordance with Advisory Circular AC 120-76A and may require operational approval.

------------------------------------------------------------END-------------------------------------------------------