What it approves
Installation of a WESCAM 24D8 camera system and/or a Spectrolab SX16 Searchlight Mount, either separately on either side of the forward fuselage or together on opposing sides.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of
Part of the
Signature
Title SR00396NY Paradigm Aviation, Inc.
1214 Hawn Avenue Shreveport, LA 71107 Federal Aviation Regulations 29
1. Configuration I: Installation of a WESCAM 24DB Camera System and/or a Spectrolab SX16 Nightsun Searchlight Mount either separately on either side of the forward fuselage or together on opposing sides in accordance with the data contained in HAS Master Drawing List MDRL-95-11-1 and “Installation Instructions for HAS External Equipment Mount”, Report No.
HAS-95-11-1, each dated February 6, 1996.
(See Description of Type Design Change continued on Page 3 of 3)
1. This approval is restricted to the external mounting of the camera and nightsun installation and does not approve the electrical provisions which would require a separate FAA approval.
2. The installer must determine whether this design change is compatible with previously approved modifications.
3. If the holder agrees to permit another person to use the certification to alter the product, the holder must give the other person written evidence of that permission.
Gaetano Sciortino Manager New York Aircraft Certification Office Bell Helicopter Textron 412, 412EP May 20, 2015, June 18, 2015 June 3, 1996, December 4, 1996, November 26, 2001, February 21, 2002 October 17, 1995 February 9, 1996 H4SW 3
FAA Form 8110-2 (5/14) Page 2 of
To (Name and address of transferee)
From (Name and address of grantor)
3 SR00396NY
FAA Form 8110-2 (5/14) Page 3 of
3 Date Reissued: June 18, 2015
Description of Type Design Change (continued):
2. Configuration II: Installation of WESCAM 16 DB Camera System and/or Spectrolab SX16 Searchlight Mount either separately on either side of the forward fuselage or together on opposing sides in accordance with the data contained in HAS Corporation Installation Instructions for HAS External Equipment Mount Report No.
HAS-95-11-1, Rev. 1, dated October 21, 1996, and Assembly and Installation Master Drawing List No.
MDRL-96-03-2, Rev. 1, dated October 21, 1996.
3. Configuration III: Installation of FLIR Ultra Media UM/LE camera and mount on the right side of the helicopter in accordance with HAS Assembly and Installation Master Drawing List MDRL-96-03-2, Rev. 2, dated November 6, 2001. In addition, camera and mount are to be installed in accordance with HAS Installation Instructions HAS-01-11-1, No Rev, dated November 4, 2001.
4. Configuration IV: Installation of FLIR Ultra Media UM/LE camera with isolation mount on right hand side of helicopter in accordance with HAS Assembly and Installation Drawing Master Drawing List MDRL-96-03-2, Rev. 3 dated December 14, 2001. In addition, camera and mount are to be installed in accordance with HAS Installation Manual HAS-01-12-1, No Rev., dated December 16, 2001.
5. Flight Manual Supplement:
a. Configuration I & II: HAS Corporation “Bell 412 Series Rotorcraft Flight Manual Supplement, Document No.
HAS-412-FMS-95-11-1, Rev. 2, FAA approved December 4, 1996, is required with this installation.
b. Configuration III: HAS Corporation Bell 412 Series Rotorcraft Flight Manual Supplement, Document No.
HAS-412-FMS-01-11-1, No Rev., FAA approved November 26, 2001 is required with this installation.
c. Configuration IV: HAS Corporation Bell 412 Series Rotorcraft Flight Manual Supplement Document No.
HAS-412-FMS-01-12-1, No Rev., FAA approved February 21, 2002 is required with this installation.
---------END---------- SR00396NY
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.