What it approves
Rapid removal door system hinges, installed in accordance with Certified Technology Installation Instructions CT9602-1, Revision C, dated January 1, 2000, or later FAA approved revision and manufactured in accordance with Certified Technology Drawing List CT9602, Revision E, dated January 10, 2000, or later FAA approved revision.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SR00409SE This certificate, issued to Certified Technology 3080 Thorntree Drive #125 Chico, CA 95973
Part 27 of the Federal Aviation Regulations.
Original ProductType Certificate Number: H3WE Make: McDonnell Douglas Helicopter Co. (Hughes) Model: 369A, 369H, 369D, 369E, 369FF, 500N, and 600N
Description of the Type Design Change: Rapid removal door system hinges, installed in accordance with Certified Technology Installation Instructions CT9602-1, Revision C, dated January 1, 2000, or later FAA approved revision and manufactured in accordance with Certified Technology Drawing List CT9602, Revision E, dated January 10, 2000, or later FAA approved revision.
Limitations and Conditions: Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate must be maintained as part of the permanent records for the modified aircraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
This certificate and the supporting data which is the ba sis for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.
Date of application: February 19, 1996 Date reissued:
Date of issuance: January 29, 1997 Date amended: 7/28/97; 10/30/00; 10/28/02
(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.