STC SR00517AT

Number SR00517AT This certificate issued to

Part 6 of the Civil Air Regulations.

Installation of a Quick-Mount Kit for the FLIR Systems, Inc. Model 2000/2500/3000 Series thermal Imager and Model U6000 Series Thermal Imager, to mount to the lower fuselage in accordance with Aeronautical Accessories, Inc. Drawing List Report No.

AA94047, Revision E, dated December 04, 1998, or later FAA approved revisions.

Bell Helicopter Textron, Inc.

441 Industrial Park Road Piney Flats, TN 37686 H2SW Make : Bell Helicopter Textron Canada Limited Model : 206A, 206B, 206L, 206L-1, 206L-3, 206L-4 Date of application : June 24, 1994

Date of issuance : July 01, 1994

Date reissued : February 16, 2012

Date amended : May 26, 1995;

January 25, 1999

( Signature) Scott A. Horn, Acting Manager, Rotorcraft Certification Office, Southwest Region

( Title)

FAA Form 8110-2-1(10-69) Page 2 of 3

FAA Form 8110-2-1(10-69) Page 3 of 3

Number SR00517AT Date of Issuance: July 01, 1994 Date Amended: January 25, 1999 Date of Reissuance: February 16, 2012

The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

The FAA Approved Rotorcraft Flight Manual Supplements or later FAA Approved revisions are required as follows:

Quick-Mount Kit for FLIR Systems, Inc. Model 2000/2500 Series Thermal Imagers for Bell Model 206A/B, Report AA-86012, Revision A, dated August 1, 1986, and Bell Model 206L/ L-1/L-3/L-4, Report AA-86015, dated August 1, 1986. The FLIR Systems, Inc. Model 3000 was added to both Rotorcraft Flight Manual Supplements and FAA Approved in Revision E, dated May 26, 1995. Quick-mount Kit for FLIR Systems, Inc. U6000 Model, Report No.

AA-98124, no revision, dated January 25, 1999 or later FAA Approved revisions.

-END-