What it approves
Installation of folding cabin step.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
1270 Aberdeen Street Hawkesbury, ON K6A 1K7
Part 29 of the Federal Aviation Regulations.
Original Product -- Type Certificate Number : H6SW Make : BELL
Model : 214B ; 214B-1
Installation of Heli-Access Step must be done in accordance with Dart Aerospace Ltd. Drawing No. D412-630, Rev.I, dated May 25, 2005, Transport Canada approved June 28, 2005, or later approved revision.
1. Manufacture of the Heli-Access Step must be done in accordance with Dart Aerospace Ltd. Master Document List MDL-412- 630, Rev.A, Transport Canada approved June 30, 2005, or later approved revision.
2. Dart Aerospace Ltd. Flight Manual Supplement No. FMS-D412-630, Revision C, Transport Canada approved June 30, 2005 is required with this modification.
3. Maintenance of the Heli-Access Step must be done in accordance with Dart Aerospace Ltd. Instructions for Continued Airworthiness ICD412-630, Rev 0, Transport Canada accepted June 30, 2005, or later accepted revision
4. Compatibility of this design change with previously approved modifications must be determined by the installer.
5. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : May 29, 1996
Date of issuance : April 01, 1997 Date reissued :
Date amended : February 07, 2000, January 02, 2001, November 10.2005
( Signature) Anthony Socias Manager New York Aircraft Certification Office
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.