STC SR00611DE

FAA Form 8110-2 (03/21) SR00611DE Dart Aerospace USA, Inc 3845 NE 30th Avenue Hillsboro, OR 97124 Part 27* the Federal Aviation Regulations H2SW 206A, 206B, 206L, 206L-1, 206L-3, 206L-4, 407 Installation of a ram air vent control cable kit in accordance with Paravion Technology Incorporated Master Drawing List DL-206VC-100, Revision N/C, dated November 22, 2006, or later FAA approved revisions.

September 22, 2006 November 16, 2023 December 27, 2006 October 11, 2007; June 24, 2008 for Manager, West Certification Branch *Certification basis is set forth in Type Certification Data Sheet H2SW.

Bell

1. Approval of this change in type design applies to the aircraft models listed above. Additionally, for Bell Models 206A and 206B only, this approval is limited to serial numbers 2489 and on.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. A copy of this Certificate and Paravion Technology Incorporated Master Drawing List DL-206VC-100, Revision N/C, dated November 22, 2006, or later FAA approved revision must be maintained as part of the permanent records for the modified aircraft.

4. Instructions for Continued Airworthiness (ICA), Paravion Technology, Inc., Document Number PR-206VC-120M, Revision 1, dated May 7, 2007, or later FAA accepted revision must be made available to the operator at the time of installation for all installations performed after June 2, 2008.

5. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

FAA Form 8110-2 (03/21) SR00611DE