What it approves
Installation of landing light panel assembly.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part 6 of the Federal Aviation Regulations. (See Type Certificate Data Sheet No. H2SW for complete certification basis.)
Original Product--Type Certificate Number: H2SW Make: Bell Model: Textron 206 A, B, L, L-1, L-3, & L-4
Installation of Landing Light Panel Assembly in accordance with Air Chuck Drawing List Report No. CNA-001, Original Release, dated December 5, 1994, or later FAA Approved Revision.
1. The installer must determine whether this design change is compatible with previously approved modifications.
2. If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission.
Scott’s – Bell 47, Inc.
100 Minnesota Avenue Le Sueur, MN 56058 Date of application : December 29, 1993
Date of issuance : January 4, 1995
Date reissued : October 9, 2019
Date amended : January 18, 1995, February 1, 1995
By direction of the Administrator Original Signed By:
Monica L. Nemecek
(Signature) Monica L. Nemecek Manager, Airframe & Administrative Section Chicago ACO Branch
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.